Once the membrane has been applied, any surface can be laid over it: tiles, stone, cement resin, marble or plaster. It’s the ideal solution for insulating the bathroom from moisture and water vapour, keeping the surfaces healthy for a long time: as long as the life of the home. In renovations and in new buildings, installers prefer TH2 Stop for its safety and user-friendliness.

TH2 Stop is guaranteed to provide top performance and has been certified in Europe and beyond. US certification was obtained by passing the tests required by various standards:

• The ANSI A118.10 (American National Standard Specifications) regulation sets out the standard requirements for load-bearing, bonded, waterproof membranes for laying ceramic and natural stone tiles.
• The ASTM E96 standard for assessing membrane water vapour transmission, in accordance with the Annex.
• The ASTM C627 standard for passing the Robinson Wheel Test, with the highest Heavy Commercial rating.

At the European level, TH2 Stop has also obtained CE certification through ETA (European Technical Assessment) in compliance with ETAG 022 Class A and C (waterproofing bonded with ceramic tiles). The directive concerns watertight covering kits for floors and/or walls of indoor wet rooms.

TH2 Stop and its accessories can be used to seal joint areas between panels or adjacent sheets and all critical points, thereby creating a fully waterproof system.

For innovative products or products not yet covered by a standard, an alternative to harmonised EN standards is the issuing of a European Technical Assessment (ETA). This document consists of the approval of the suitability for use of a certain product, consistent with ETAG guidelines. ETAG guidelines are prepared under an EC mandate by a special European organisation EOTA (European Organisation for Technical Assessment) comprising national administrations and institutes responsible for assessing the technical suitability of innovative products.

TH2 Stop also passed the tests required by the European AbP (Allgemeines Bauaufsichtliches Prufzeugnis) standard, the most stringent in the industry. This building inspection certificate issued by accredited German building authorities in the sector allows the product to be distributed in the German market.

The post TH2 Stop: certified waterproofing appeared first on TeMa Corporation.

A new soap dish, a rug to contrast with the floor and a larger mirror are good starting points, but it’s strictly in architectural terms that spaces can be customised.

Let’s see how.

SOLUTIONS FOR NEW CONSTRUCTION

The first thing to bear in mind is the fact that the bathroom is a place with a high amount of humidity and vapour, therefore any intervention works must provide suitable long-lasting solutions.

The TeMa Interior system allows many intervention works to make your bathroom extremely personal, including creating walls, making the spaces you want and external cladding for the bathtub with a whirlpool and shower, or creating structures for washbasins, shelves, niches or small cabinets.

Water Panel gives you the opportunity to create self-supporting partition walls for a sophisticated look in the bathroom. Its wide range of thicknesses (see data sheet) makes it an extremely adaptable and functional product.

It can be used as cladding for the bathtub and shower, also because it’s waterproof and prevents the risk of water seepage, which would cause costly damage, and conceals fixtures, therefore becoming a true furnishing element. In addition, since it’s cut to size, it offers the very advantageous option of making the shower or bathtub the required size.

Also for washbasins and walls for the installation of sanitary fixtures, creative solutions can be found with Water Panel: the structure supporting them, whether just one or many more, can be custom-made with a mirror recess and shelves.

Of course, Water Panel can be cladded with your choice of finish: tiles or plaster.

To make it even more visually attractive, you can choose to include niches thereby maximising the use of space. T-Niche is the ideal waterproofed prefabricated product for all your needs.

The above-mentioned products are very light, extremely easy to handle and can also be carried to upper floors without requiring a freight lift.

RENOVATION SOLUTIONS

Workers in the house, bathrooms out of use and dust everywhere: the nightmare can be minimised if you choose to waterproof your shower with TH2 Stop, the membrane that can be applied under tiles with standard cement glue and cladded as desired.

Accessories

To complete the work at critical points, such as corners, specific products can be used such as T-Corner I and T-Corner E, whereas at panel joints, where there are fixtures and drains, T-Bandel can be applied and fixed with T-Fix.

What are the advantages?

All solutions can be customised to the millimetre, on-site and without causing any dust, for quick installation. This allows unprecedented speed of work with the highest performance ever.

The post Furnishings and accessories for designer bathrooms appeared first on TeMa Corporation.

Vapour, water drops on the walls and permanently wet floors are the problems we find, but the unknown arises when humidity also penetrates the walls. And that’s when invisible damage starts to affect the structure.

Clearly, the most obvious consequence of humidity is the appearance of stains and moulds which, as we all know, are not healthy for people or for the structure, but fortunately they are a clear sign that something is wrong.

When swimming pools are open to the public, and therefore very busy, all designers know that it’s important to prevent any signs of deterioration in the toilet and shower area. Basically, this is the area where user’s sensitivities are aroused, and so it’s important to look for the most suitable materials and finishes, using hardwearing elements capable of resisting over time. In addition, the products used must be completely waterproof and resistant to humid environments.

If not properly considered right from the design stage, there’s a real risk of encountering problems with damp, tiles coming off and walls that flake off very quickly.

Moreover, the problem is worsened by the temperature difference between inside and outside during the coldest periods.

The solution from TeMa Interior Solutions

We are specialised in damp-proofing and waterproofing at large construction sites, and now also in interior solutions. We have therefore developed the right product to be vapour- and water-resistant. For example, Water Panel, the XPS (extruded expanded polystyrene) panel bonded with waterproof facers on both sides, to which cement-based glue can be directly applied for laying tiles or other claddings that design now has to offer.

The advantage of this product is that it’s ready to use, i.e. quick and easy to assemble while ensuring maximum performance and customisation. Being lightweight is a huge advantage on-site, as well as the fact that it can be cut without creating dust. In addition, it’s ideal for a variety of applications, as it’s available in a wide range of thicknesses from 6 mm to 50 mm.

Available accessories include:

• an adhesive for fixing;
• T-Corner I/E for waterproofing corners;
• T-Bandel for joining panels;
• T-Fix for applying to gaps between panels;
• T-Wall Collar for waterproofing the outlet areas of installations.

The post The solution to humidity in swimming pool shower rooms appeared first on TeMa Corporation.